国产精品久久久久久久乖乖亚洲精品中文字幕嘿嘿嘿 ,国产精品久久久国产

Home Market And Service CHEMICALS

CHEMICALS OIL PRODUCTION ENGINEERING Wind And Solar Energy Water Environmental Protection

Our products cover more than 70 countries, regions and domestic markets. It is one of the most famous suppliers of chemicals and equipment in the international enhanced oil recovery market and also one of the largest producers of Polyacrylamide in the world. In order to better promote the internationalization process, the company has set up offices in Canada, UK, US, Russia, South Africa, Japan, Oman and Singapore.

恒聚化學(xué)品介紹

Polyacrylamide

Polyacrylate

Surfactants

Functional monomer

Others

Anionic polyacrylamide

Anionic polyacrylamide is a kind of water-soluble polymer

Overview

Anionic polyacrylamide is a kind of water-soluble polymer. Because the molecular chain contains a certain number of polar groups, it can adsorb the suspended solid particles in the water, and make the particles bridge and agglomerate to form large flocs. Therefore, it can accelerate the sedimentation of particles in the suspension, and has an obvious effect of accelerating the solution clarification and promoting filtration. It is widely used in petroleum industry, oil extraction, drilling mud, waste mud treatment, preventing water channeling, reducing friction, enhancing oil recovery and tertiary oil recovery. It is also used for flocculation and sedimentation of various industrial waste water, precipitation flotation and sludge dewatering treatment, such as steel plant wastewater, electroplating wastewater, Metallurgical Wastewater, coal washing wastewater and other sewage treatment, sludge dewatering, etc.

Product Features

Flocculation: PAM can neutralize the suspended matter by electricity, bridge adsorption and flocculation.
Adhesiveness: through the mechanical, physical, chemical role to play a bonding role.
Resistance reduction: PAM can effectively reduce the friction resistance of the fluid, and adding a small amount of PAM in water can reduce the resistance by 50-80%.
Thickening property: PAM has thickening effect under neutral and acidic conditions. When pH value is above 10 ℃, PAM is easy to hydrolysis. The thickening will be more obvious when the structure is semi-reticular.

Instructions

1. The product is usually prepared into 0.05% - 0.5% (w / W) solution for standby.
2. While dissolving, the product should be evenly dispersed and mixed while feeding.
3. While using, water with low TDS should be used, and the dissolving tank and pool made of materials easy to affect water quality should be avoided.
4. Increasing the water temperature can accelerate the dissolution rate, but generally the water temperature should not exceed 50 ℃.

Packaging

Dry powder products are packed in paper and plastic composite bag, each bag weights of 750 kg, can also be determined according to user needs, shelf life of 2 years; water solution and emulsion using 25 or 200kg plastic bucket sealed packaging, can also be determined according to user needs, shelf life of 1~2 years.

Precautions

Powder is easy to absorb moisture. Please pay attention to moisture-proof. It should be stored in a cool, ventilated and dry warehouse.
The emulsion should be stored in a cool, ventilated and dry storeroom, sealed and kept, to prevent the mixing of electrolytes and lead to demulsification and affect the use.

Technical Service

Beijing Hengju provides product selection, laboratory test, factory industrial production and comprehensive technical services for our customers.

Cationic polyacrylamide

Cationic polyacrylamide is a water-soluble polymer

Overview

Cationic polyacrylamide is a water-soluble polymer. Because there are a certain number of adsorption and polar groups in its molecular chain, it can absorb suspended solid particles in water, bridge and neutralize the charges between particles, and agglomerate the particles to form large flocs. It can accelerate solid-liquid separation and promote filtration. It is mainly used for flocculation and sedimentation of various industrial and domestic sewage, sedimentation and flotation, sludge thickening and sludge dewatering.

Product Features

1. It has good water solubility and can be completely dissolved in cold water.
2. By adding a small amount of this series of products, it can get great flocculation effect. Generally, only 0.01 ~ 10ppm (0.01 ~ 10g / m3) is needed to give full play to the effect.
3. At the same time, the use of this series of products and inorganic flocculants (polyferric sulfate, polyaluminium chloride, ferric salt, etc.) can show greater effect.

Instructions

1. 0.1-0.3% concentration of water solution, and neutral water without salt impurities is suitable.
2. When dissolving, sprinkle this series of products into the agitated water, and control the stirring speed at 100 ~ 300rpm.Proper heating (< 60 °C) can accelerate dissolution.
3. Adjust the pH value of the treated liquid to make the series of products play a full role (the best pH value and the dosage of this series of products are selected through the test).
4. When adding the solution of this series of products, it is necessary to accelerate the mixing with the treated liquid, and slow down the stirring speed after the appearance of flocs, so as to facilitate the growth of flocs and accelerate the sedimentation.

Packaging

Precautions

Technical service

Beijing Hengju provides product selection, laboratory test, factory industrial production and comprehensive technical services for our customers.

Nonionic polyacrylamide

Nonionic polyacrylamide is a water-soluble polymer or polyelectrolyte

Overview

Nonionic polyacrylamide is a water-soluble polymer or polyelectrolyte. Because there are a certain number of polar groups in its molecular chain, it can bridge the suspended solid particles in water, bridge the particles or neutralize the particles by charge to form large flocs. Therefore, it can accelerate the sedimentation of particles in the suspension, and has an obvious effect of accelerating the solution clarification and promoting filtration. It is mainly used for flocculation, sedimentation and clarification of various industrial wastewater. Such as papermaking and pulp wastewater treatment, mineral processing and metal smelting process wastewater treatment, steel plant and stone processing plant wastewater treatment.

Product Features

1. It has good water solubility and can be completely dissolved in cold water.
2. Adding a small amount of this series of products can achieve great flocculation effect. Generally, only 0.01 ~ 10ppm (0.01 ~ 10g / m3) is needed to give full play to the effect.
3. At the same time, the use of this series of products and inorganic flocculants (polyferric sulfate, polyaluminum chloride, ferric salt, etc.) can show better effect.

Instructions

1. 0.1-0.3% concentration of water solution, and neutral water without salt impurities is suitable.
2. While dissolving, sprinkle this series of products into the agitated water, and control the stirring speed at 100 ~ 300rpm.Proper heating (< 60 ° C) can accelerate dissolution.
3. Adjust the pH value of the treated liquid to make the series of products play a full role (the best pH value and the dosage of this series of products are selected through the test).
4. While adding the solution of this series of products, it is necessary to accelerate the mixing with the treated liquid, and slow down the stirring speed after the appearance of flocs, so as to facilitate the growth of flocs and accelerate the sedimentation.

Packaging

Precautions

Powder is easy to absorb moisture. Please pay attention to moisture-proof. It should be stored in a cool, ventilated and dry warehouse.
The emulsion should be stored in a cool, ventilated and dry storeroom, sealed and kept, so as to prevent the mixing of electrolytes and lead to demulsification and affect the use.

Technical service

Beijing Hengju provides product selection, laboratory test, factory industrial production and comprehensive technical services for our customers.

Amphoteric ionic polyacrylamide

Amphoteric ionic polyacrylamide is a kind of water-soluble polymer polyelectrolyte

Overview

Amphoteric ionic polyacrylamide is a kind of water-soluble polymer polyelectrolyte, which is soluble in water but insoluble in organic solvents such as ethanol and acetone. Its molecular chain contains both cationic and anionic groups, which can effectively reduce the Zata potential with the active adsorption groups in sludge or sewage through the action of electric neutralization, adsorption bridging and intermolecular winding and wrapping, so as to effectively reduce the zata potential and make the suspended solids settle or float up. It has good dehydration performance and metal ion removal performance. Its pH value is widely used and widely used. It can be used as flocculant, sludge dewatering coagulant, special sludge and organic mixed wastewater treatment agent, adsorbent, metal ion chelating agent, papermaking auxiliary agent and oilfield chemical auxiliary agent.

Product Features

Amphoteric polyacrylamide (Amphoteric polyacrylamide) is prepared by hydrolysis copolymerization of cationic and anionic group. The advantage is that it has the typical characteristics of general cationic flocculant. It is used for extracting ore with strong acid or recovering valuable metal from acid catalyst containing metal. Amphoteric type is not a simple mixture of anionic and cationic. If cationic polyacrylamide and anionic polyacrylamide are mixed, precipitation will occur. Therefore, Amphoteric products are the most ideal.

Instructions for use

1. The product is usually prepared into 0.1% - 0.3% (W / W) solution for standby.
2. According to different uses, the best dosage should be selected by experiment.

Packaging

Precautions

Powder is easy to absorb moisture. Please pay attention to moisture-proof. It should be stored in a cool, ventilated and dry warehouse.

Technical service

Beijing Hengju provides product selection, laboratory test, factory industrial production and comprehensive technical services for our customers.

Sodium Polyacrylate

Sodium polyacrylate is a new functional polymer material and important chemical product

Overview

Sodium polyacrylate is a new functional polymer material and important chemical product. The solid product is white (or light yellow) powder, and the liquid product is colorless (or light yellow) and viscous liquid. It can be dissolved in cold water, warm water, glycerin, propylene glycol and other media. It has the function of fixing metal ions and preventing the negative effect of metal ions on products. It is a kind of polymer with many special properties. Industrial applications cover chemical industry, agriculture, petroleum industry, industrial circulating water system, mining, coating, paper making, textile, construction and medical and health industries.

Product Features

As a fine chemical product, sodium polyacrylate is a water-soluble polymer compound with strong thickening and water retention function. The product has high purity, stable performance, odorless and tasteless, and does not deteriorate for a long time. The thermal stability is strong. It can hardly decompose at 200 degrees and combine with two valence metal ions such as iron, calcium and magnesium to form gel which is insoluble in water. When used with guar gum and other thickeners, the viscosity of its aqueous solution will be greatly increased. Therefore, an aqueous solution of the same viscosity can be obtained with a relatively small amount of addition.

Instructions

1. Quickly stir the water, slowly and evenly add sodium polyacrylate powder (do not add a large amount at a time, the rubber powder should be slowly sprinkled into the weighed water, and do not pour water into the rubber powder, otherwise it is easy to form micelles and difficult to dissolve), stir for 10 minutes, after the particles are swelling and suspended, they can be dissolved after standing for 2 hours. The dissolution concentration of this product is generally less than 2 ‰.
2. The viscosity of the same water is very different. It is suggested that soft water should be dissolved.
3. The viscosity of sodium polyacrylate decreases with the increase of salt concentration.

Packaging

Bead shaped products are packed in paper＆plastic composite bags, each bag weights of 750 kg, which can also be determined according to the needs of users, with a shelf life of 5 years.

Precautions

Sodium polyacrylate products are easy to absorb moisture. Please pay attention to moisture-proof. It should be stored in a cool, ventilated and dry warehouse.

Technical Service

Beijing Hengju provides product selection, laboratory test, factory industrial production and comprehensive technical services for our customers.

Special alkylbenzene sulfonate surfactant for ASP flooding

Special alkylbenzene sulfonate is a product obtained from alkyl benzene with multi-carbon chain

Product Introduction

?Special alkylbenzene sulfonate is a product obtained from alkyl benzene with multi-carbon chain, sulfonated and then special treatment. It has strong emulsifying and dispersing ability for crude oil, fuel oil and various petroleum products. The important application of special alkylbenzene sulfonate is to be used as oil displacement agent and oil emulsifier. After proper blending, it can form ultra-low interfacial tension with crude oil, spontaneously dissolve crude oil to form a stable solution, and maintain certain dissolving emulsification effect, with strong oil displacement ability.

Product Property

The surfactant used in oil displacement has a certain selectivity to the properties of crude oil, and the structure of the surfactant used varies with the properties of different oil fields. The molecular structure of surfactants should match the crude oil components to achieve ultra-low interfacial tension and higher oil displacement efficiency. In order to meet the needs of different oil fields, BHS -100, BHS -200 and BHS -300 series have been developed.
The property of the product is as follows:

Table 1：The property of the special alkylbenzene sulfonates
Item No.	Active Content（％）	Appearance	pH
BHS -100	50±2	Light yellow liquid	11-13
BHS -200	50±2	Light yellow liquid	7-10
BHS -300	50±2	Light yellow liquid	7-10

Product Features

?When the sulfonate surfactant is used alone, under low dosage can form an ultra-low interfacial tension with the crude oil under weak or strong alkali condition, improve the performance of the oil displacement and achieve good oil displacement effect. It can also be compounded with alkyl benzene sulfonate, petroleum sulfonate, a-olefin sulfonate, petroleum carboxylate, biosurfactant and amphoteric surfactant.
The BHS surfactant has the following remarkable features:
(1) Strong adaptability
(a) Applicable to heavy oil and high viscosity oil. For commonly used sulfonate surfactants are generally applicable to the crude oil whose density is lower than 0.904g/cm-3 and the viscosity is lower than 3.0x10-2Pa.s.
(b) High temperature and salt resistance. Commonly used sulfonate surfactants are generally not suitable for high salinity reservoir conditions for their poor performance of salt-resistance.
(c) Single agent can be used for a wide range of crude oil. Commonly used sulfonate surfactants can only be used for only a few kinds of crude oil, and the composition should be changed to adapt to different crude oils, or use it in combination with other surfactants, which increases the investment in ground equipment and hard to promoted as commercial products.
(2) Good compatibility.
(a) It is suitable for ASP flooding system under weak alkali condition as well as strong alkali condition.
(b) Compatible to many kinds of polymer. Even when high concentration and ultra-high molecular weight polymer was used, the effect on the interfacial tension between the system and crude oil is small and can reach a wide ultra-low range.
(c) Compatible to wide range of alkali concentration. It can adapt to the alkali concentration range from 0.2% to 0.8%, or 0.2%-1.2% for some oilfield under strong alkali condition; from 0.6% to 1.6% under weak alkali condition. However, heavy alkyl benzene sulfonate surfactants can be only used when the concentration of alkali is 0.9%-1.3% for their poor ability of salt-resistance, and petroleum sulfonate performs even worse.
(3) High performance-price ratio
(a) It can reach good results under low dosage condition (0.1%). Low adsorption, high activity, good emulsification, wide range of use.
(b) The product has good solubility and high flash point, which reduces the cost of ground engineering investment and operating.

Product Application

This series of surfactants have higher activity in the lower concentration range of 0.05%-0.3% (mass fraction), which can be determined according to site conditions.

Storage

Pay attention to ventilation and store at room temperature.

a-alkene sulfonate surfactants for EOR

a - alkene sulfonate is a product obtained by sulfonating multi - carbon chain alkenes

Product Introduction

a - alkene sulfonate is a product obtained by sulfonating multi - carbon chain alkenes. It has strong emulsifying and dispersing ability for crude oil, fuel oil and various petroleum products. The important use of a-alkene sulfonate is to be used as EOR flooding agent and crude oil emulsifier. After proper blending, it can form ultra-low interfacial tension with crude oil, spontaneously dissolve crude oil and form a stable solution, maintain certain dissolving emulsification, and has a strong oil displacement capability. In addition, a-alkene sulfonate has strong foaming property and is widely used as a foaming agent for EOR, especially for steam flooding.

Product Property

?Surfactants for oil displacement have a certain selectivity to the properties of crude oil. The structure of the surfactant varies with the properties of different oil fields. The molecular structure of surfactants should be matched with the components of crude oil to achieve ultra-low interfacial tension and higher oil displacement efficiency. In order to meet the needs of different oilfields, we have developed a series of products.
The property of the product is as follows:

Table 1：The property of a - alkene sulfonate
Item No.	Active Content（％）	Appearance	pH
BHS-400 series	≥30	Light yellow liquid	7-9

Product Features

?This series of a- alkene sulfonate surfactants have good biodegradability and non-toxic characteristics. It’s a kind of green and environmentally friendly product. As a steam foaming agent, it has good temperature and salt resistance, can control steam-cross flow, overcome gravity override, reduce viscous fingering, reduce steam fluidity, adjust steam injection profile, increase sweep coefficient, and enhance heavy oil recovery. As a surfactant for ternary combination flooding, it can form an ultra-low interfacial tension system with crude oil in most oilfields under weak or strong alkali and low dosage. This product can be used alone to achieve a good oil displacement effect, or it can be combined with alkylbenzene sulfonate, petroleum carboxylate, biosurfactant and amphoteric surfactant.

Product Application

This series of surfactants have higher activity in the lower concentration range of 0.05%-0.3% (mass fraction), which can be determined according to site conditions.

Storage

Pay attention to ventilation and store at room temperature.

Acrylamide

The molecular formula of acrylamide (AM) is CH2=CHCONH2

Overview

The molecular formula of acrylamide (AM) is CH2=CHCONH2. It is an unsaturated amide with two reactive centers of amide group and double bond. It has active chemical properties and is the simplest and most important amide compound. The main uses of acrylamide are as follows: synthesize water-soluble polymers; increase the adhesion of the hydrophilic center of the lipophilic polymer, the softening point of the resin and the solvent resistance; it can also be used as a crosslinking agent for vinyl polymers. Among them, the polyacrylamide polymer produced is one of the most widely used varieties of water-soluble polymers. It has the name of "Versatile additives " and "Universal Product". It is mainly used in petroleum exploration, metallurgy, construction, textile, manufacturing Sugar, medicine, agriculture and other fields.

Product performance indicators

Item	Index
Appearance	Colorless and transparent liquid
Acrylamide concentration(%)	25~50
Acrylonitrile（%）	≤0.05
Acrylic acid（%）	≤0.2
Chroma（Hazen）	≤10
Polymerization inhibitor	According to customer requirements
pH value	6~8
Iron（mg/L）	≤10

Product Features

The molecular weight of acrylamide is 71.08, and the concentration of the aqueous solution is 25-50%. It is soluble in water, acetone, ethanol, and slightly soluble in benzene. The nature of the dark place is relatively stable, it is easy to polymerize under high temperature or ultraviolet light, and release corrosive gas when exposed to high heat. It belongs to the category 6.1 poison and is harmful to the central nervous system.

Instructions

Acrylamide polymerizes with acrylic acid (AA), sodium acrylate, 2-acrylamido-2-methylpropanesulfonic acid (AMPS) and other anionic intermediates containing active double bonds to form anionic polyacrylamide copolymers. Acrylamide and acryloxy ethyl trimethyl ammonium chloride (DAC), methacryloxy ethyl trimethyl ammonium chloride (DMC), dimethyl diallyl ammonium chloride (DMDAAC), etc. active cationic monomers synthesize cationic polyacrylamide copolymers. Acrylamide can also synthesize non-ionic polyacrylamide through homopolymerization reaction, and non-ionic polyacrylamide can synthesize anionic polyacrylamide through the subsequent alkaline hydrolysis process.

Packaging

The acrylamide aqueous solution products are packaged in 200kg or 1000kg plastic drums, which can also be determined according to user needs. The shelf life is 2 years.

Precautions

The packaging is required to be sealed, not in contact with air, and should be stored in a cool, ventilated and dry warehouse. Keep away from fire and heat sources, and should be stored separately from oxidants, acids, alkalis, and edible chemicals, and avoid mixed storage.

Dimethyldiallylammonium chloride

Dimethyldiallyl ammonium chloride is a quaternary ammonium salt containing two unsaturated double bonds

Overview

Dimethyldiallyl ammonium chloride is a quaternary ammonium salt containing two unsaturated double bonds, abbreviated as DMDAAC, molecular formula is C3H16NCL, and molecular weight is 161.5. The product is a 60% or 65% aqueous solution, and the appearance is colorless, transparent or slightly yellow, non-irritating odor liquid, with a slight consistency. As a cationic monomer, DMDAAC can be homopolymerized or copolymerized to form a polymer. It is used to prepare high molecular polymer and its polymers such as high molecular flocculant, fixing agent, oil field chemical agent, papermaking chemical agent, etc. It can be used as a superior aldehyde-free fixing agent in textile dyeing and finishing auxiliaries to form a film on fabrics to improve dyeing fastness; in papermaking auxiliaries, it can be used as a retention and drainage aid, and antistatic agent; in water treatment, it can be used as a decolorant,，flocculant and purifier, which is efficiency and non-toxic; in daily chemicals, it can be used as a combing agent, wetting agent and antistatic agent in shampoo; in oil field chemicals, it can be used as a flocculant, Water blocking agent, etc. Its main function is electric neutralization, adsorption, flocculation, purification, and decolorization, especially as a modifier of synthetic resins, imparting conductivity and antistatic properties.

Product performance indexs

Item	Index
Appearance	Colorless and transparent liquid
Solid content(%)	65±1
pH value	5.0~7.0
NaCl（%）	≤2

Product Features

It is soluble in water, ethanol, isobutanol, insoluble in esters, ketones and hydrocarbons. It will not be hydrolyzed, is not flammable, and has strong stability under various pH conditions. It can be used in solution polymerization and emulsion polymerization to form linear homopolymers and various copolymers.

Instructions

As a cationic monomer, DMDAAC can be homopolymerized or copolymerized to form a polymer.

Packaging

The DMDAAC aqueous solution is packaged in 200kg or 1000kg plastic drums, which can also be determined according to user needs. The shelf life is 2 years.

Precautions

The packaging is required to be sealed, not in contact with air, and should be stored in a cool, ventilated and dry warehouse. Keep away from fire and heat sources.

Acryloyloxyethyl trimethyl ammonium chloride

Acryloyloxyethyl trimethylammonium chloride (DAC) is an important cationic monomer

Overview

Acryloyloxyethyl trimethylammonium chloride (DAC) is an important cationic monomer. Its aqueous solution is a colorless or light yellow transparent liquid, which can be homopolymerized or copolymerized with other monomers, such as acrylamide, methyl Copolymerization of acrylamide, acrylonitrile, methyl acrylate, methyl methacrylate, styrene, acrylic acid or methacrylic acid, etc., thereby introducing quaternary ammonium salt groups into the polymer. It can be widely used in the production of water treatment flocculants, antistatic coatings, papermaking additives, chemicals, fiber additives and other fine off-molecule products.

Product performance indexs

Item	Index
Appearance	Colorless or light yellow transparent liquid
Solid content(%)	80±1
pH（10% solution）	4.0~5.5
Color（APHA）	≤50
Inhibitor（MEHQ ppm）	500~800

Product Features

It is soluble in water, methanol, ethanol, and insoluble in organic solvents such as acetone, ester, and hydrocarbon. DAC is easy to self-polymerize when exposed to high temperature, light, or radiation. so a certain amount of polymerization inhibitor is generally added to industrial products. The presence of vinyl groups in the molecule makes it easy to copolymerize with other unsaturated monomers. The presence of quaternary ammonium salt groups makes the whole molecule show cationic properties. The copolymerization products with other vinyl monomers are cationic polymers. It has high cationic activity and charge density.

Instructions

As a cationic monomer, DAC is generally copolymerized with its monomer to form a polymer.

Packaging

DAC water solution products are packaged in 200kg or 1000kg plastic drums, which can also be determined according to user needs. The shelf life is 2 years.

Precautions

The packaging is required to be sealed, not in contact with air, and should be stored in a cool, ventilated and dry warehouse. Keep away from fire and heat sources.

Methacryloxyethyl trimethyl ammonium chloride

Methacryloxyethyl trimethylammonium chloride (DMC) is an important cationic monomer

Overview

Methacryloxyethyl trimethylammonium chloride (DMC) is an important cationic monomer. Its aqueous solution is a colorless or light-yellow transparent liquid. It can be homopolymerized or copolymerized with other monomers to produce cationic polymerization. This polymer has strong polarity and affinity for anionic substances, so it can be widely used as a cationic flocculant. It can be used in the sludge dewatering process of sewage treatment plants and wastewater treatment in industries such as papermaking, coal flotation, printing and dyes. In addition, DMC can also be used to produce acid-resistant super absorbent resin and oil field chemicals.

Product performance indexs

Item	Index
Appearance	Colorless or light-yellow transparent liquid
Solid content (%)	80±1
pH（10% solution）	4.0~5.5
Color（APHA）	≤50
Inhibitor（MEHQ ppm）	500~800

Product Features

Instructions

As a cationic monomer, DAC is generally copolymerized with its monomer to form a polymer.

Packaging

DAC water solution products are packaged in 200kg or 1000kg plastic drums, which can also be determined according to user needs. The shelf life is 2 years.

Precautions

The packaging is required to be sealed, not in contact with air, and should be stored in a cool, ventilated and dry warehouse. Keep away from fire and heat sources.

Polydimethyldiallyl ammonium chloride

This product is a water-soluble polymer polyelectrolyte

Overview

This product is a water-soluble polymer polyelectrolyte, which can be completely dissolved in water. Because the polymer body contains strong ionic groups and active adsorption groups, the suspended particles and water-soluble substances containing negative charge groups can be destabilized and flocculated by electric neutralization. It is widely used in sewage treatment, mining and mineral processing as cationic coagulant. It can be used as formaldehyde free fixing agent in textile industry and anionic trash catching agent in papermaking process. It can be also used as clay stabilizer for drilling and cationic modifier for acid fracturing in water injection in oilfield industry. In addition, it can be used as conditioner, antistatic agent, humidifier, shampoo and moisturizer for skin care. Our company can produce 40 ~ 60% aqueous solution products and bead particles.

Product Performance Index

1. Performance Index of Aqueous Solution Products
Colorless to yellowish viscous liquid with solid content of 39% ~ 41%, pH of 4.5 ~ 7 and viscosity of 300 ~ 100000 can be produced. And the product index can change according to customer demand.
2. Performance Index of Bead Products

model	HENGFLOC102	HENGFLOC105	HENGFLOC109
appearance Bead, white or yellowish solid particles	Bead, white or yellowish solid particles
Solid content	≥88%	≥88%	≥88%
Particle size (mm)	0.1~0.85	0.1~0.85	20~100
Mesh number	20~100	20~100	20~100
Rotational viscosity (CP)	≤50	50~200	≥200
Note: the test condition of rotational viscosity is 10% aqueous solution.

Product Features

This product is a strong cationic polyelectrolyte. The appearance of aqueous solution product is colorless to light yellow viscous liquid, and the appearance of bead product is like transparent or slightly yellow solid particles. pH has a wide range of applications (0.5~14). The products are non-toxic, tasteless and odorless. It is also soluble in water, nonflammable, strong cohesion, good hydrolysis stability, no gel, insensitive to changes in pH value, and has chlorine resistance.

Instructions

1. When it is used for water treatment, it should be prepared into a diluted solution with a solubility of 0.5 ~ 0.05%.
2. Neutral water without salt and inclusion is the best solution.
3. Diluted solution should be prepared while using, and the storage time should not exceed two days.
4. While dissolving, the stirring speed should be within 80 ~ 100rpm.
5. Warm water can accelerate dissolution.
6. The stability of the system should be kept as much as possible in the operation to make it operate under the best conditions.

Packaging

Bead shaped products are packed in paper＆plastic composite bags, each bag weights of 750 kg, which can also be determined according to the needs of users, with a shelf life of 2 years. The water solution of 25, 200 kg plastic barrels can also be in sealed packaging according to the needs of users and the shelf life is 2 years too.

Precautions

Bead products are easy to absorb moisture. Please pay attention to moisture and moisture. It should be stored in a cool, ventilated and dry warehouse.

Technical Service

Beijing Hengju provides product selection, laboratory test, factory industrial production and comprehensive technical services for our customers.

Polyamine

Polyamine is a highly charged, low molecular weight water-soluble polymer with a colorless to yellowish viscous liquid appearance

Overview

Polyamine is a highly charged, low molecular weight water-soluble polymer with a colorless to yellowish viscous liquid appearance. It is mainly used for coagulation and destabilization in water treatment process, especially for organic wastewater rich in protein and fine fiber. Since it provides more positive charges per unit mass than the currently used cationic products, it has increasingly shown its superiority and has been widely used abroad.

Physical Performance

Appearance	Solid content（%）	Viscosity（cps）	pH
Colorless to reddish-brown transparent liquid	35±2	100~200	2~5
	50±2	50~200	5~8
	50±2	200~500	4~7
	50±2	500~1000	4~7
	50±2	1000~3000	4~7
	50±2	3000~6000	4~7
	65±2	1000~3000	4~7

Product Characteristics

1. All positive charges are distributed on the main chain, with good chlorine stability and good compatibility with inorganic coagulants;
2. It is mainly used for the decolorization treatment of high-chroma wastewater from dye plants, and can be applied to the treatment of reactive, acidic and disperse dye wastewater.
3. This product can also be used for the treatment of industrial wastewater such as textiles, pigments, inks, papermaking nights, and oil field drilling.
4. The decolorization rate of this product for wastewater is greater than 95%, and the removal rate of COD is between 50% and 70%.

Instructions

1. The product can be dissolved in water at any concentration. It is recommended to dilute the product 10 times with clean water before adding it into the system.
2. The product should avoid all kinds of pollution, including pollution caused by tanks, pumps, and piping systems, etc.
3. The application effect of the product and the point of addition depend on the following factors: type of sewage, pipeline layout, other additives, pH and other operating conditions. When used for water purification, the addition amount is generally 5~50PPM.
4. During operation, the system should be kept as stable as possible to make it operate under the best conditions.

Packaging

Polyamine products are sealed and packed in 200kg plastic drum, which can also be determined according to the user's demand. The shelf life is 2 years.

Precautions

It should be stored in a cool, ventilated and dry warehouse.

Technical Services

Beijing Hengju provides product selection, laboratory test, factory industrial production and comprehensive technical services for our customers.

Dicyandiamide Formaldehyde Resin

Dicyandiamide resin decolorizing flocculant is a highly efficient decolorizing coagulant

Overview

Dicyandiamide resin decolorizing flocculant is a highly efficient decolorizing coagulant, which has obvious decolorization and COD reduction effects. Mainly used in the treatment of industrial wastewater such as textiles, printing and dyeing, papermaking, pigments, mining, inks, landfill leachate, etc., can also be used for the decolorization of high-chroma wastewater from dye plants, and can be applied to wastewater treatment such as reactive, acidic and disperse dyes. . This product can also be used as paper reinforcing agent, sizing agent and charge neutralizing agent.

Physical Performance

Items	Index	Test Method
Appearance	Colorless to yellowish viscous liquid	Visually inspect and stir
Solid Content（%）	50±2	Weight
Viscosity（cps）	30~130	Brookfield Viscometer
pH	4.5~6.5	pH meter

Product Characteristics

1. Strong ability to decolorize and remove COD and BOD
2. Faster and better flocculation sedimentation
3. No pollution (no heavy metal ions)

Instructions

1. Dilute this product 10-50 times with clean water, add it directly to the wastewater and stir it evenly. After sedimentation or air flotation, the decolorized clear liquid can be obtained. It is better to control the pH value of the waste water at 7~10.
2. When the chroma and COD of the wastewater are high, it is advisable to use the decolorizer in combination with inorganic flocculants such as polyaluminum chloride and polyiron for treatment, which can reduce the treatment cost. The adding method, proportion and order can be determined by mixing experiment and wastewater treatment process.
3. Keep the system as stable as possible during operation to make it operate under the best conditions.
4. The place and mixing speed of the agent in the system should be carefully selected. It is necessary to ensure that it is evenly mixed with the material, but also to avoid the breakage of the floccules.

Packaging

Dicyandiamide formaldehyde resin products are sealed in 200kg plastic drums, which can also be determined according to user needs. The shelf life is 2 years.

Precautions

It should be stored in a cool, ventilated and dry warehouse. If there is stratification or whitening when stored at low temperature, it will not affect the effect after mixing. The recommended storage temperature is 5~30℃.

Technical Services

Beijing Hengju provides product selection, laboratory test, factory industrial production and comprehensive technical services for our customers.

Application fields of Hengju’s chemicals

水處理

As polymer flocculant, water treatment is mainly used for flocculation and sedimentation of municipal waste water and industrial waste water (such as food, paper making, mineral processing, textile, printing and dyeing, medicine, tanning, chemical industry, steel-making, stone and slaughtering waste water), sedimentation clarification and air flotation for solid-liquid separation treatment.

Enhancing oil recovery

This paper introduces the technology of enhancing oil recovery by gas injection, chemical injection, ultrasonic stimulation, microbial injection or heat recovery.

Mineral processing

It can be used for separation of slime, filtration of clean coal and purification of coal ash water. It can be used for cleaning, flotation, enrichment and separation in the mining process of various minerals

Paper making

It can be used as retention aid and drainage aid to improve the retention rate of paper fiber and filler and the drainage speed of pulp hopper. It can be used as dry strength agent and wet strength agent to improve the dry and wet strength of paper.